Filter
Top Products
Removal and Replacement Procedures
Maintenance and Service Guide 5–21
7. Lift the top edge of the keyboard and swing it up and forward
until it rests on the top cover 1 (Figure 5-12).
8. Disengage the keyboard cable from the retaining clips in the
top cover.
9. Release the ZIF connector to which the pointing device cable
is attached 2 and disconnect the pointing device cable 3.
10. Release the ZIF connector to which the keyboard cable is
attached 4 and disconnect the keyboard cable 5.
Figure 5-12. Disconnecting the Pointing Device and
Keyboard Cables
11. Remove the keyboard.
Reverse the preceding procedure to replace the keyboard.