Filter
Top Products
Removal and Replacement Procedures
Maintenance and Service Guide 5–41
✎
Figure 5-27 applies only to Evo Notebook N620c and N610c
models. When handling the system board, be careful not to put
stress on the I/O interface board 1. The narrow profile of this
board makes it susceptible to being damaged when mishandled.
The system board should only be removed and handled using the
Media Bay connector 2. After the system board is installed in the
base enclosure, apply gentle downward pressure on the I/O
interface board directly above the two connectors 3 and 4 that
connect the I/O interface board to the system board.
Figure 5-27. Proper Handling of the I/O Interface Board on
Evo Notebook N620c and N610c Models
Reverse the preceding procedure to replace the system board.