Filter
Top Products
System Specifications 2-7
2.2.2 Power Specifications
Table 2–5 through Table 2–8 give the power specifications for fully loaded
GS160/320 systems for different regions.
Table 2–5 Power Specifications of a GS160 with One System Box
Specification U.S./Canada/Japan Europe
Voltage, Vrms
1
120/208 or 202 380–415
Frequency, Hz 50–60 50–60
Phases 1 circuit
3-phase star or
3-wire+N+GND
1 circuit
3-phase delta
3-wire junc. GND or
4-wire-mid-GND
1 circuit
3-phase star
3-wire+N+GND
Power plug, quantity
2
L21-30P, 1 IEC309 5P 32A, 1
Max input current/phase 18A 10A
Rating 30A 32A
Surge current 225A peak 150A peak
Total VA2
3
4,400 4,400
Total power
3
4,360 watts 4,360 watts
Heat output
3
14,900 Btu/hr 14,900 Btu/hr
Power cord length 15 ft/4.5 m 15 ft/4.5 m
Power cap (system) 1 DEC 12-12314-00 1 DEC 12-14379-
Receptacle (site)
(industry equiv.)
1 DEC 12-12315-01
1 NEMA L21-30R
1 Hubbell 532R6W
1 IEC 309 (32A)
1
The US/Canada/Japan model supports a three-phase star connected source with nominal voltage of
115-127V/200-220V or a three-phase delta connected source with a nominal voltage of 200-240V.
The Europe model supports a three-phase star connected source with a nominal voltage of 200-
240V/346-415V.
2
The single-box GS160 system is equipped with a second power cord for future expansion.
However, only one power cord is required for the GS160 system with one system box.
3
Based on fully loaded system with two PCI boxes and one storage shelf in the power cabinet.