Filter
Top Products
4–6 Hardware and Software Guide
Multimedia
Connecting the Video
To transmit video signals through the S-Video–out jack, you need
a standard S-Video cable, available from most computer or
electronics retailers.
Plug one end of the S-Video cable into the notebook S-Video–out
jack, illustrated below. Plug the other end of the cable into the
S-Video–in jack on the external device.
Displaying a Video Image
To display an image on the notebook display or a video device
display, both the notebook and the video device must be
turned
on.
» To switch the image between the notebook display and the
video device display, repeatedly press the
fn+f4 hotkey.
Pressing the
fn+f4 hotkey switches the image among the
notebook display, any connected displays, and simultaneous
display.
For more information about fn+f4 and other hotkeys, refer to the
“Hotkeys” section in Chapter 2, “Keyboard and Touchpad.”