Compaq 400C 486 DX2/40 MHZ 250 MB 4 MB 9.5 Personal Computer User Manual


 
2. Replace the display cable on the monochrome LCD panel by carefully
inserting the end of the display cable into the ZIF connector slide on
the LCD panel (Figure 3-95).
IMPORTANT: Ensure that the ZIF connector slide is in its fully upward
position and that it remains so while you are inserting the
cable into it. Before closing the slide, ensure that the
cable is fully seated in the ZIF connector.
3. While holding the end of the display cable inside the ZIF connector
slide, press down both ends of the slide simultaneously to secure the
cable in the ZIF connector (Figure 3-95).