Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-14 Removal and Replacement Procedures
5.3.4 DualBay Battery Pack
and Devices
Either a diskette drive or a modular battery pack may be installed into the DualBay.
The device in the DualBay must be removed prior to performing maintenance on the
computer. For convenience, a diskette drive is depicted in this sequence, but the
procedure is the same regardless of the device. To remove the DualBay device,
complete the following steps:
1. With the computer open and the display screen in the upright position, lift the front
of the computer slightly. Push inward on the front of the DualBay device while
pressing in the DualBay eject button
1
on the right side of the computer. Lifting the
computer prevents the rubber foot on the bottom of the DualBay device from
dragging.
2. Pull the DualBay device
2
out of the DualBay.
Figure 5-12.
Removing the DualBay Device