Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Removal and Replacement Procedures 5-15
CAUTION:
The device in the DualBay must be removed prior to performing maintenance
on the computer.
!
WARNING:
Metal objects can damage the battery pack as well as the battery contacts in
the battery compartment. To prevent damage, do not allow metal objects to touch the
battery contacts. Place only the battery pack for the Compaq Armada Personal Computer
into the battery compartment. Do not force the battery pack into the handle if insertion
does not occur easily.
!
WARNING:
Do not crush, puncture, or incinerate the battery pack. Do not dispose of in
water. Do not expose to temperatures higher than 60
°
C. Do not open a battery pack, as
this damages the pack, makes it unserviceable, and exposes potentially harmful battery
components. There are no field-serviceable parts located inside the battery pack.
To install the DualBay device, complete the following steps:
1. Lay the computer flat on a table or work surface. If installing a battery pack, orient
the battery pack with its label facing up and the battery contacts facing into the
DualBay.
2. Lift the computer slightly, align the DualBay device with the metal rails in the
DualBay, and push it into the computer until it clicks into place. Lifting the
computer prevents the rubber foot on the bottom of the DualBay device from
dragging.
Figure 5-13.
Inserting a DualBay Device