Filter
Top Products
6–12 Getting Started
Using Application Recovery and System Recovery
11. With Yes selected, press Enter.
The PC starts the recovery; wait for the
onscreen instructions to display, and then
follow those instructions.
❏ For standard recovery, press R, and then
press R again. Click Next to proceed
with the non-destructive system recovery.
Click Yes to start the recovery. Insert the
remaining CDs when directed.
Or
❏ If your PC hard disk drive is blank or
corrupted, press R to perform a full system
recovery. Insert the remaining CDs when
directed.
12. When the recovery program finishes, click
Restart to restart the computer.
13. Before the computer restarts, the CD tray
ejects. Remove the CD.
14. Return the BIOS to the original setting. Enter
the BIOS setup program during the startup by
doing the following:
When the black screen with the Compaq logo
appears, press the F1 key on the keyboard
until Entering SETUP displays. (You have only
a few seconds to press the F1 key before the
normal setup process continues.) Wait until the
BIOS setup program opens.
15. Press the right arrow key to select Boot.
16. Press the down arrow key to select Boot
Device Priority, and then press Enter.