Filter
Top Products
System Management
5.5 Monitoring
5.5.5 History Screens
New monitor screens that show partition state or network connection history
include MONITOR accfail and MONITOR rscbe.
5.6 Remote Command Support
With the new support for TCP/IP, you can execute commands on remote systems
using the rsh utility.
To use this feature, check your operating system documentation for how to ensure
access to a TCP/IP environment, and grant such privileges to users. You may,
for example, need to make an entry in the .rhosts file in the home directory of
the RTR user on the target node or nodes, among other things. This file would
contain the host name (and optionally the user name) of the node where the
remote commands will be issued.
5.7 Partition Management
Partitions are now managed objects in RTR Version 3.2; partitions can be defined
by the system manager before application startup. New commands listed in
Table 5–6 support partition management.
5.8 Transaction State Management
Transaction state can be changed by the system manager to resolve certain
deadlock situations using the SET TRANSACTION command. For more
information on this command, see the RTR System Manager’s Manual.
5.9 Using RTR Version 2 Command Procedures
Most RTR Version 2 command procedures will still work with RTR Version 3.
One changed command is listed in Section 5.3.2 and fully described in the RTR
System Manager’s Manual.
5.10 Command Line Interface Support for RTR Version 2 API
Command-line interface support for the RTR Version 2 API may not be fully
compatible between RTR Version 2 and RTR Version 3. See the RTR Version 3
System Manager’s Manual and Release Notes for additional details.
5.11 Interpreting Output from SHOW Commands
The output from SHOW commands has changed with RTR Version 3. All SHOW
output now includes date and time. Additional changes are listed in Table 5–4.
Table 5–4 Changed SHOW COMMANDS
Command Description
SHOW CLIENT This new command displays information about client channels.
It supersedes the SHOW REQUESTOR command.
SHOW SERVER/FULL The SHOW SERVER/FULL command provides new
information on states.
(continued on next page)
5–4 System Management