Compaq AA-RH8RD-TE Computer Accessories User Manual


 
products (DS-DWZZH UltraSCSI hubs, and HSZ70 and HSZ80 RAID
array controllers)
How to prepare systems for a TruCluster Server configuration and how
to connect host bus adapters to shared storage using the DS-DWZZH
UltraSCSI hubs and the newest RAID array controllers (HSZ70 and
HSZ80)
How to set up and upgrade Memory Channel cluster interconnects
An overview of Fibre Channel and how to set up Fibre Channel hardware
to allow Tru64 UNIX and TruCluster Server installation on Fibre
Channel disks
The use of AlphaServer GS80, GS160, or GS320 hardware partitions in a
TruCluster Server configuration
How to configure a shared SCSI bus for tape drive, tape loader, or tape
library usage
Requirements for a shared SCSI bus using externally terminated
configurations and radial configurations using non-UltraSCSI RAID
array controllers
How to prepare systems and host bus adapters for TruCluster Server
configurations using externally terminated configurations and radial
configurations using non-UltraSCSI RAID array controllers
3.1.4 Cluster Highly Available Applications (revised)
The Cluster Highly Available Applications manual describes how to move
applications from a TruCluster Available Server or TruCluster Production
Server to a TruCluster Server environment and how to use TruCluster
Server functionality to make applications highly available.
A tutorial is provided on how to use the Cluster Application Availability
(CAA) subsystem to track the state of members and resources in a cluster
and restart or relocate them to another member if a failure in an application
is detected.
This manual also describes how to use TruCluster Server application
programming interfaces (APIs) to take advantage of cluster technologies such
as the distributed lock manager (DLM), cluster alias, and Memory Channel.
3.1.5 Cluster Installation (revised)
The Cluster Installation manual describes the following installation
procedures:
Installing TruCluster Server software on the Tru64 UNIX operating
system and creating a new cluster
System and Network Management Documentation 3–3