Compaq C200 Computer Monitor User Manual


 
141
Changing Your Workstation’s Hardware Configuration
Installing an EISA, PCI, or GSC Option Board
Installing the Option Board
Follow these steps to install a GSC, EISA, or PCI board into your worksta-
tion:
1 Remove the main tray assembly as described in “Removing the Main Tray As-
sembly” earlier in this appendix.
2 Press the fan release clip and rotate the fan, as shown in Figure 50.
Figure 50 Rotating the Fan
3 Remove the screw from the EISA retainer, and remove the EISA retainer, as
shown in Figure 51.
Figure 51 Removing the EISA Retainer
EISA Retainer