Filter
Top Products
- 9 -
ENGLISH
17" Model
CONTRAST
BRIGHT
COLOR TEMPERATURE
HORIZ-SIZE
HORIZ-PHASE
VERT-SIZE
VERT-POSITION
PINCUSHION
KEYSTONE
TOP-PIN
BOTTOM-PIN
PIN-BALANCE
KEY-BALANCE
ROTATION
GEOMETRY RESET
MOIRE CANCEL LEVEL
CLAMP PULSE POSITION
VIDEO LEVEL
DEGAUSS
POWER-SAVE
CONTROL LOCK
DIAGNOSIS
LANGUAGE
Group
Icon
Press the Minus Button
Item
Item
Icon
Press the Plus Button
To move the image to the left. To move the image to the right.
To narrow the height of the image
on the screen.
To expand the height of the image
on the screen.
To decrease the contrast.
To increase the contrast.
To decrease the brightness.
To increase the brightness.
To decrease the color temperature.
To increase the color tempera-
ture.
To narrow the width of the image
on the screen.
To expand the width of the image
on the screen.
To move the image down.
To move the image up.
To collapse the center of the
image.
To expand the center of the
image.
To decrease the width at the top
of the screen image and to
increase the width at the bottom.
To increase the width at the top of
the screen image and to decrease
the width at the bottom.
To expand the width of the screen
image near the corners of top.
To narrow the width of the screen
image near the corners of top.
To expand the width of the screen
image near the corners of bottom.
To narrow the width of the screen
image near the corners of bottom.
To move the top and bottom of the
screen image to the right.
To move the top and bottom of
the screen image to the left.
To make the screen slant to the
left.
To make the screen slant to the
right.
To rotate the image counterclock-
wise.
To rotate the image clockwise.
To restore to factory preset level.
To decrease the level of the moire-clear wave.
To eliminate an excessive green or white-back ground that
may occur when external sync signals are applied to the
monitor.
To clamp the video signal at
the front of the H-Sync pulse.
To clamp the video signal at the
back of the H-Sync pulse.
To select 1.0V of video input.
To select 0.7V of video input.
To eliminate possible color shad-
ing or impurity.
To select the constant power
consumption mode.
To select the power-save mode.
To permit all OSD adjustments.
To lock the OSD function except for
"BRIGHT" and "CONTRAST".
It shows the current scanning frequency and Preset No. or user mode.
To choose the language used on OSD.
ENG......English, ESP......Spanish, JPN......Japanese,
GER......German, FRA......French
SCREEN
GEOMETRY
VIDEO
MISC.
When FPM is on, the color temperature is fixed to 9300K and it is not
adjustable.