Filter
Top Products
Removal and replacement procedures
Maintenance and Service Guide 4–25
5. Remove the four Torx T8M2.0×6.0 screws 1 that secure the display assembly to the computer. Be sure to hold
the display before removing the last screw to prevent damage to the display.
6. Lift the display assembly 2 straight up and remove it.
Perform the following steps in sequence to remove or replace the display bezel or the display assembly internal
components.
1. To remove the display bezel:
a. Remove the two rubber screw covers 1 at the bottom of the display assembly and peel back the two rubber
bumper strips 2 at the top of the display assembly.