Filter
Top Products
Removal and replacement procedures
Maintenance and Service Guide 4–27
2. To remove the webcam module:
a. Disconnect the webcam cable 1 from the computer.
b. Remove the webcam module 2 from the display enclosure. (The webcam is secured with
double-sided tape.) The webcam can also be ordered separately and is available using spare part number
492159-001.
3. To remove the display inverter:
a. Use a flat bladed screwdriver to release the inverter 1, which is secured with double-sided tape.
b. Disconnect the backlight cable 2 and the display panel cable 3 from the display inverter. The display
inverter is available using spare part number 493193-001.