Filter
Top Products
f. Speaker assembly (see Speaker assembly on page 58)
g. Display assembly (see
Display assembly on page 66)
h. Top cover (see
Top cover on page 55)
Remove the following cables from the system board if still connected:
●
Power connector cable (see
Power connector cable on page 65)
●
Bluetooth cable (see
Bluetooth module on page 63)
●
USB board cable (see
USB board on page 64)
1. Turn the computer upright with the right side toward you.
2. Remove the three Phillips PM2.5×3.0 screws that secure the system board to the computer.
3. Release the optical drive cable (1) from the system board.
4. Lift the right side of the system board (2).
74 Chapter 4 Removal and replacement procedures