Compaq EB1H Network Card User Manual


 
MAGMA
22 Chapter 4 Software Installation
Chapter 4 Software Installation
Windows
A driver is NOT required for Windows Vista, but may be required for a
Windows XP installation. You should first install your 3
rd
Party card and
connect Magma ExpressBox
1
following instructions as described in
Chapter 2. Only if you are having problems with your Windows XP
system should you install the Magma ExpressCard drivers.
Before attempting to install anything on a Windows XP system, you
should ensure that you have set a new Restore Point. See your
Windows XP manual to learn how to set a new Restore Point. You
should ensure that all data files are closed and that you have a current
backup.
STOP
Before installing drivers, you should ensure that you have a current
system backup of all of your important data.
Failure to follow these instructions exactly could result in a system
lock-up and potential loss of data.
Be alert
Be careful
Be protected
You must also disable your anti-virus software before continuing.
For best success when installing the Magma driver:
Have a current system backup or restore point
Reboot and Shut down each time you are prompted
Be logged in as ‘System Administrator’
Follow the installation instructions provided in this guide
You must be logged in as ‘System Administrator’ while installing Magma
ExpressBox
1
. You must remain logged in as ‘System Administrator’ until
installation is complete.