Filter
Top Products
5–52 Maintenance and Service Guide
Removal and Replacement Procedures
4. Turn the base enclosure top side up with the front facing
forward.
5. Remove the three TM2.5 × 5.0 screws
1
that secure the top
cover to the base enclosure (Figure 5-40).
6. Lift the top cover straight up
2
approximately one inch, then
slide it forward
3
until the microphone cable
4
is exposed.
7. Disconnect the microphone cable
5
from the system board.
8. Remove the microphone
6
from the top cover.
9. Remove the top cover from the base enclosure.
Figure 5-40. Removing the Top Cover and Microphone
✎
The microphone is included in the Miscellaneous Cable Kit,
spare part number 285540-001.