Compaq N1020V Personal Computer User Manual


 
Removal and Replacement Procedures
Maintenance and Service Guide 5–57
h. Top cover, microphone, and TouchPad cable
(Section 5.20)
i. Fan (Section 5.21)
2. Remove the two TM2.5 × 5.0 screws
1
that secure the optical
drive front alignment rail to the base enclosure (Figure 5-43).
3. Remove the front alignment rail
2
from the base enclosure.
4. Remove the two TM2.5 × 5.0 screws
3
that secure the optical
drive rear alignment rail to the base enclosure.
5. Remove the rear alignment rail
4
from the base enclosure.
Figure 5-43. Removing the Optical Drive Alignment Rails
The optical drive alignment rails are included in the
Miscellaneous Plastics/Hardware Kit, spare part number
285541-001.