Filter
Top Products
Installation
Page 3-10
J3
Power On/Off
(This is connected to the power button on the
case. Using the Soft-Off by Pwr-BTTN feature,
you can choose either Instant Off (turns
system off immediately), or 4 sec delay (you
need to push the button down for 4 seconds
before the system turns off). When the system
is in 4 sec delay mode, suspend mode is
enabled by pushing the button momentarily.)
Turbo LED indicator
LED ON when higher speed is selected
IDE LED indicator
LED ON when Onboard PCI IDE Hard disks is
activate
IR Connector
1. VCC 4. GND
2. NC 5. IRTX
3. IRRX
Power LED
Power LED connector
1. Power LED(+) 4. NC
2. N/C 5. GND
3. GND
Speaker
Connect to the system's speaker for beeping
1. Speaker 3. GND
2. N/C 4. GND
Reset
Closed to restart system.
J2