Filter
Top Products
3
USING THE AUTOLINK
FEATURE FOR NETWARE
The AutoLink feature for NetWare configures the adapter as a
NetWare DOS ODI client. The AutoLink installation steps are
depicted in Figure 3-1.
Figure 3-1 AutoLink Installation Process
This chapter describes the AutoLink program requirements,
ways to avoid memory conflicts, and installation steps. See
Chapter 4 for additional network drivers information.
The AutoLink program performs the following functions:
■ Configures the 3C689 adapter.
■ Tests the adapter.
■ Installs the DOS ODI client driver.
■ Logs on to the server and updates the NetWare client
software if a 3Install account exists on the server; otherwise,
the client software is installed from the TokenDisk diskette.
Insert
TokenDisk
diskette.
Make diskette drive active.
Type: AUTOLINK
Select ring speed
Reboot computer
If memory manager is installed,
exclude memory range
CC000 – D3FFF