Filter
Top Products
United States January 2, 2003
Maintenance & Service Guide
Presario 1600 Series
Models: 1650 and 1655
| Home Page | Notice | Preface | Product Description | Troubleshooting
Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications
Pin Assignments | Battery Pack Operations
Removing the Speaker Assembly
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
Battery Pack
Palmrest
Cover with
Touch Pad
Keyboard
Heatspreader
Modem
Processor
Status Panel
Interface
Board
Hard Drives
Battery
Charger Board
CD Drive
Display Panel
Assembly
Upper CPU
Cover
Speaker
Assembly
Diskette Drive
Fan Assembly
Audio Board
System Board
Memory
Module
To remove the
speaker
assembly,
complete the
following steps:
1. Prepare the
computer for
disassembly.
2. Remove the
palmrest cover
with touch pad.
3. Remove the
keyboard.
4. Remove the
heatspreader.
5. Remove the
hard drive.
6. Remove the
stiffener bracket.
7. Remove the
display panel
assembly.
8. Remove the CD
drive.
9. Disconnect the
speaker cables
from the system
board and
remove the
speaker assembly
from the chassis.
NOTE:
The
speaker
cables
must be
properly
routed
when
replacing
the
speaker
assembly.
Place the
cables in such
a manner that
they cannot
be caught or
snagged by
screws.
For more
information
refer to the
section on
speaker
assembly
cable
position.
To replace the
speaker
assembly, reverse
the previous
procedures.
privacy statement
legal notices