Filter
Top Products
Chapter 3 Configuring NetPassage 15B
35
Figure 3.5.1-2
Defining Filtering
Function
4. To define a rule for Time-based Access Control, you need to know the IP address
of the computers where this rule applies. For example, if you wish to disallow two
computers (IP address of 192.168.168.10 and 192.168.168.11) to access to the
Internet between 10:00PM to 8:00AM, you may define a rule with the following
parameters:
Rule Name Enter your preferred name for this rule
IP Address Select Range from the drop down menu
(From) 192.168.168.10
(To) 192.168.168.11
Destination Port Any
(From) <blank>
(To) <blank>
Day of the Week Any
(From) Sun
(To) Sun
Time of the day Select Range from the drop down menu
(From) 22:00
(To) 08:00
5. Press the Apply button to add this filtering function into the list.
6. Ensure that the Sent radio button is “checked”.
7. Press the Apply button for the changes to be effective.
3.5.2 Internet Application Filtering
To define a function to perform Internet Application Filtering:
1. Press the Add button at the filtering configuration page as shown in Figure 3.5.1-1.
2. To define a rule to perform Internet Application Filtering, you need to know the
TCP port of the application of which this rule applies. For example, if you wish to