Filter
Top Products
Click the Wireless item in the left column to setup the wireless LAN configuration of
your camera.
- Connection Mode:
Use this option to determine the type of wireless
communication for your camera.
There are two choices of Infrastructure mode and Ad-Hoc
mode. The default setting is Infrastructure.
- SSID:
The SSID (Service Set Identifier) is the name assigned to the
wireless network. It will auto-detect and display the SSID of
wireless network connected in this box (it displays default
initially). This default setting will let the camera connect to
ANY access point under the infrastructure network mode.
To connect the camera to a specific access point on the
network, please make sure to set the SSID of the camera to
correspond with the access point’s SSID for communication.
Type any string up to 32 characters long (spaces, symbols,
and punctuation are not allowed) in the Network Name box.
To connect the camera to an Ad-Hoc wireless workgroup,
make sure to set the same wireless channel and SSID to
match with the PC/Notebook’s configuration for direct
wireless communication.
- Wireless Channel:
This pull-down menu provides the wireless channel for
communication. A "channel" is a range of frequencies to be
used in communication between the camera and access
point in Infrastructure mode, or the camera and PC/Notebook
in Ad-Hoc