Connect Tech SSD/104 SATA User Manual
Revision 0.00
5
Introduction
Connect Tech’s SSD/104 SATA is a complete rugged stackable solid state drive (SSD) and storage solution
that allows up to two mSATA SSD modules to be installed into any PC/104-Plus, PCI-104, PCI/104-
Express and PCIe/104 stack or embedded system. SSD/104 SATA solid state drive (SSD) and storage
solution improves performance, expands storage capacity and reduces overall storage footprint in an
embedded system.
Designed with the latest generation of mSATA SSD modules, SSD/104 SATA solid state drive (SSD) and
storage solution can be easily upgraded to accommodate future generations of mSATA modules for even
greater system capacity and performance.
When combined with mSATA SSD modules, SSD/104 SATA solid state storage solution directly
interfaces with the standard SATA bus, which can be used as a drop-in replacement for any SATA storage
device. SSD/104 SATA can also be interfaced with any single board computer or embedded system using
standard 7-pin SATA.
SSD/104 SATA is available as a complete storage solution with a preinstalled mSATA module, or as a
separate mSATA carrier which supports any mSATA SSD module.