Filter
Top Products
2. Press the Space bar to toggle between options. To display the OSD in future press the new
hotkey.
Autoskip
With the Autoskip feature, the arrow keys only access the active computer lines on the OSD. When
Autoskip is Off, The arrow keys access both active and inactive computer lines.
To change the Autoskip setting:
1. Navigate to the Autoskip line.
2. Toggle between the options using the Space bar.
Serial port
The Serial port is used for the Control Management program. Serial port On means the program can
be used.
To change the Serial port setting:
1. Navigate to the Serial port line.
2. Toggle between the options using the Space bar.
Changing the Keyboard language
The keyboard is preset to US English, this can be changed to French (FR) or German (DE), as
follows:
1. Navigate to the Keyboard language line.
2. Toggle between the options using the Space bar.
Editing the Switch name
You can substitute up to 18 characters in the line. A space constitutes a character. When there is
more than one switch in the system give each Switch’s Osd a different name.
22. F7 Defaults
Press F7 to return the OSD to the factory default settings. Note! All changes made will be removed.
23. The Ports settings
In the Settings window navigate to the Ports line and press Enter. The Ports settings window
appears see Figure 11.