Filter
Top Products
KVM Switch
17
Change Configuration while Running
A device (a computer or a KVM switch) at any 'PC x' port can be changed
at any time after initial power-up. If you change any one of the “PC 1” to
“PC 8” ports connection from a computer to a Slave or vice versa, or
replace the devices of a port; the OSD will update this change the next
time it is activated.
Note: Any new device must be turned off before it is connected to the
Master.
KVM Switch
18
------------------------------------------------ AppendicesAppendices
Specifications:
Specifications SL-18 SL-218 SL-216
User port number 1 2 2
Computer port number 8 8 16
Cascade control PC number Up to 64* Up to 64* Up to 136*
On-screen display (OSD) Yes
Front panel button control
8, available when connected to a KVM
drawer
Hot plug-and-play Yes
Hot-key control Yes
Rack-mounted Yes, 19”industry-standard
Automatic scan interval 3, 8, 15, 30 seconds
Programmable scan pattern Yes
30M (100ft) at CONSOLE Cable length (Max)
30M (100ft) at PC ports
VGA bandwidth 1920 x 1440, DDC2B
KVM drawer connector C-36
keyboard
Computer mouse connector
monitor
PS/2
PS/2, serial (with adapters for 2 ports)
HDB-15 male
keyboard
Console mouse connector
monitor
PS/2
PS/2
HDB-15 female
H x W x D (mm)
(in.)
44x483x560
1.7x19x22
88x483x560
3.5x19x22
Rear-mount brackets 1U-height, included
size 1U 2U
Power supply (min) 12V DC