Filter
Top Products
Page 6
Unpacking And Installation
Complete the following steps to install your Avant keyboard:
• Carefully unpack your keyboard as you would any other piece of
electronic equipment.
• Store the packing material in a safe place. If, for any reason, you are
required to return the keyboard during the warranty period, the keyboard
must be shipped in the original packaging along with a copy of the invoice/
packing slip.
• Turn your computer off.
• Disconnect your old keyboard.
• Connect the Avant keyboard to your system by plugging the cable into the
appropriate port on your system.
• The keyboard comes standard with the 6-pin mini DIN connector. If you
need a 5-pin AT style plug, please purchase the appropriate adapter.
• Press and hold the <Escape> key while turning on your system. When the
indicator lights blink, release the <Escape> key. This ensures that the
keyboard is set to the factory default settings.
Page 15
Troubleshooting and Technical Support
If you experience problems or questions setting up or using your Avant key-
board, please refer to the on-line help located in the Avant utilities program. In
many instances problems that arise are minor and can be resolved easily.
If you are unable to resolve the problem, contact CVT for technical support.
For technical support worldwide, call 763-478-6446.
Please have the following information ready when you call CVT: computer
manufacturer, computer model number, computer type, operating system
version and keyboard serial number.