Filter
Top Products
Installing the Modem 1-3
Connecting
Telephone Line and
Phone Set
1. Locate the most convenient telephone wall outlet.
If a phone is already connected to it, unplug the telephone cable from the wall outlet.
2. Connect the telephone cable from the phone set to the
Phone
jack of the modem, as shown
in Figure 1-1.
3. Connect one end of a telephone cable to the wall outlet and the other end to the
Telephone
Line
jack of the Modem Blaster, as shown in Figure 1-1.
About Your
Telephone Line
To ensure that the modem functions properly, note that:
❑ Your modem cannot be used on “party lines”, nor can it be used on toll or coin-operated
lines.
Contact your local telephone company for help if you are not sure about the suitability of
your telephone line.
❑ This modem is intended for use on an analog telephone line, also known as a POTS (Plain
Old Telephone Service) line. You cannot connect the modem directly to a digital telephone
line, such as those commonly used in offices.
If you want to connect to a digital line, you need an analog converter compatible with the
telephone line you are using.