Filter
Top Products
Crestron CEN-UPS1250 Uninterruptible Power Supply
Setup
Ethernet
Unlike other Crestron network devices, the CEN-UPS1250 does not use Cresnet
for
communications between the device and the control system. The CEN-UPS1250
requires the use of a high-speed Ethernet connection for control system
communications.
For information on connecting Ethernet devices in a Crestron system, refer to the
latest version of the Crestron e-Control
Reference Guide (Doc. 6052), which is
available for download from the Crestron website (www.crestron.com/manuals
).
Identity Code
The IP ID is set within the CEN-UPS1250’s table using Crestron Toolbox™. For
information on setting an IP table, refer to the Crestron Toolbox help file. The IP IDs
of multiple CEN-UPS1250 devices in the same system must be unique.
When setting the IP ID, consider the following:
• The IP ID of each unit must match an IP ID specified in the SIMPL™
Windows
®
program.
• Each device using IP to communicate with a control system must have a
unique IP ID.
Supplied Hardware
The hardware supplied with the CEN-UPS1250 is listed in the following table.
Supplied Hardware for the CEN-UPS1250
DESCRIPTION PART NUMBER QUANTITY
Left Rail Assembly 2020250 1
Right Rail Assembly 2020251 1
#10-32 x 1/2” Pan Head Phillips Screw 2020255 10
#10-32 x 1/2” Ornamental Screw 2020254 6
#8-32 x 3/8” Pan Head Phillips Screw 2020252 4
#10-24 x 3/8” Pan Head Phillips Screw 2020256 8
Cleat 2” Formed 2020257 2
Rack Mounting Ear, 3U, Modified 2020253 2
Installation
The CEN-UPS1250 may be installed on a flat, solid surface or rack mounted. Proper
placement of the CEN-UPS1250 should be accomplished in accordance with the
following procedures.
WARNING: The CEN-UPS1250 weighs 62 pounds (28.12 kg) and we recommend
that two people lift the unit. If you remove the battery as described on the following
page, it will make lifting and positioning the unit much easier. Lift the unit carefully
Operations & Installation Guide – DOC. 6635A Uninterruptible Power Supply: CEN-UPS1250 • 11