Filter
Top Products
~ Page 40 ~
4-7. PERIPHERAL SETUP
This section is used to configure the peripheral features.
BIOS: Peripheral Setup
OnBoard FDC
This option enables the floppy drive controller on the AR-B1682.
OnBoard Serial Port
This option enables the serial port on the AR-B1682.
IR Port support
This item is to activate the function of Infra-red.
OnBoard Parallel Port
This option enables the parallel port on the AR-B1682.
Parallel Port Mode
This option specifies the parallel port mode. ECP and EPP are both bi-directional data transfer schemes that
adhere to the IEEE1284 specifications.
Parallel Port DMA Channel
This option is only available if the setting for the parallel Port Mode option is ECP.
K/B Wake-Up function
This item is to set up the function of waking-up the system by Keyboard from suspend mode.
Mouse Wake-up function
This item is to set up the function of waking-up the system by Mouse from suspend mode.
AMIBIOS SETUP - PCI/PLUG AND PLAY SETUP
(C) 1998 American Megatrends, Inc. All Rights Reserved
Plug and Play Aware O/S Yes
Clear NVRAM No
On board PCI LAN Controller Enabled
PCI Latency Timer (PCI Clocks) 64
Primary Graphic Adapter PCI
PCI VGA Palette Snoop Disabled
PCI IDE BusMaster Disabled
PCI Slot1 IRQ Priority Auto
PCI Slot2 IRQ Priority Auto
PCI Slot3 IRQ Priority Auto
PCI Slot4 IRQ Priority Auto
DMA Channel 0 PnP
DMA Channel 1 PnP
DMA Channel 3 PnP
DMA Channel 5 PnP
DMA Channel 6 PnP
DMA Channel 7 PnP
IRQ 3 ISA/EISA
IRQ 4 ISA/EISA
IRQ 5 PCI /PnP
IRQ 7 ISA/EISA
IRQ 9 PCI /PnP
IRQ 10 PCI /PnP
IRQ 11 PCI /PnP
IRQ 12 PCI /PnP
IRQ 14 PCI /PnP
IRQ 15 PCI /PnP
Reserved Memory Size 32K
Reserved Memory Address CC000
Available Options :
Yes
No
ESC:Exit :Sel
PgUp/PgDn:Modify
F2/F3:Color