Filter
Top Products
CyberData Corporation 930105A Operations Guide
Installing and Using the 4-Port PoweredUSB Hub
Installation
4
Figure 2-1. Component identification: external front and back views
Figure 2-2. Product Compatibility
The CyberData 4-Port PoweredUSB 2.0 Hub with Serial Ports is compatible with the following
operating systems and USB standards.
2.2 Installation
The CyberData 4-Port PoweredUSB 2.0 Hub with Serial Ports is a tabletop unit with mounting feet
that sit on a flat surface.
Port power
(Pwr) and Hub
power LEDs
+24V up to 2.5 Amp load
+24V up to
6.5 Amp load
USB Host Connector Type B
Strain
Relief
+12V PoweredUSB Ports +24V
PoweredUSB Port
Link and
Port1
Status
LEDs
Standard USB 2.0 Hi-Speed
Type A Ports
Serial Ports
● In GREEN Mode, when 12V power
applied with no host plugged in -
Hub Power LED (Blue) is on, the 4
port Power LEDs and the Host Link
(connection) LED DO NOT light.
● Connect a standard USB 2.0 cable
from host PC to Host connector on
back of hub with 12V power
connected and all four top Port
Power LEDs light and turn on green
sequentially and the host
(connection) Link LED connector
turns on green.
● When a peripheral is plugged into
the enumerated hub; into one of the
hub ports; and the peripheral
enumerates in the OS, the Status Led
for that Port will light and turn green
● On a peripheral load error on any
port, the Status LED turns orange
and 12V power to the upper portion
of the connector is turned off until
the hub is restarted.
Operating systems USB
Windows 2000 and XP 2.0 Standard
LINUX PoweredUSB 0.8g
Mac OS-X