CyberPower ATT36A12V3S Power Supply User Manual


 
CyberPower ATT3612V3S (Leave Behind Manual) Page: 5 of 11
Wear protective clothing and eye protection whenever installing, maintaining, servicing, or
replacing batteries.
If any battery emission contacts the skin, immediately and thoroughly wash with water.
Follow approved chemical exposure procedures.
Neutralize any spilled battery emission with the special solution contained in an approved
spill kit or with a solution of one pound Bicarbonate of soda to one gallon of water. Report
chemical spills and seek medical attention if necessary.
Never use un-insulated tools or other conductive materials when installing, maintaining,
servicing or replacing batteries.
A battery showing signs of cracking, leaking, or swelling should be replaced immediately
with a battery of identical type and rating.
2.3 Safety Warning Label
The AC power cord is supplied with the warning label “DO NOT UNPLUG! – Power Supply for
Voice, 911 Dialing, and Battery Charging” attached to the cord.
Figure 2: Warning Label
! DO NOT UNPLUG!
Power Supply
for Voice, 911 Dialing, and Battery Charging.