Filter
Top Products
Installation
This USB Hub is a plug-and-play device. Your computer will display the Add
New Hardware Wizard after connecting the hub. The Add New Hardware
Wizard will install the Cyber Power USB Hub automatically. It is not necessary
to restart your computer after installation.
To use this USB hub with Windows 98 operating system, please visit
http://www.cyberpowersystems.com and download the appropriate software
driver before installing this Hub.
1) Plug the USB Connector into an unused USB port on your computer.
2) Please use the included USB extension cable if the attached USB Connector
is too short.
3) Connect your USB devices to the Downstream ports on this Hub.
9