Filter
Top Products
3.1 Windows 95, 98, 98SE, Me, 2000, XP
You will first need to install SeaCOM prior to using the
COML 2232F. Installing the supplied
SeaCOM software that comes with your product will copy the necessary files into the proper
Windows folders. Windows will use these files to “recogniz
e” the COML 2232F card.
IMPORTANT: In Windows XP SP1, you will need to apply a “hot fix” from Microsoft to correct
a bug that causes the ports to appear to be installed properly, yet are non-functional. Please
contact Sealevel Systems technical support for assistance.
For Windows 95/98/ME/NT/2000, the diagnostic tool ‘WinSSD’ is installed in the SeaCOM
folder on the Start Menu during the setup process. First find the ports using the Device Manager,
then use ‘WinSSD’ to verify that the ports are functional.
3.2 Windows CE, PocketPC
There is no need to install any software for Windows CE or PocketPC. Simply insert the
COML
2232F card and two entries will appear in a list when you go to set up a “Connection”.
Note: The standard OS drivers allow use of only one port at a time.
For Windows CE and PocketPC, the utility ‘vxHpc’ is available from Cambridge Computer
Corporation, free for a 30-day evaluation or a nominal charge for a license. ‘vxHpc’ is a high
performance serial and telnet communication software application that can help you connect to
various terminal devices and can also be used to perform a simple loopback test.
The latest version and instructions are available here:
http://www.cam.com/vxhpc.html
CyberResearch
®
Serial Communications COML 2232F
CyberResearch, Inc. 3
25 Business Park Drive P: (203) 483-8815; F: (203) 483-9024
Branford, CT USA www.cyberresearch.com
Installing the COML 2232F