Filter
Top Products
CY7C1345G
4-Mbit (128K x 36) Flow Through Sync SRAM
Cypress Semiconductor Corporation • 198 Champion Court • San Jose, CA 95134-1709 • 408-943-2600
Document Number: 38-05517 Rev. *E Revised July 15, 2007
Features
■ 128K x 36 common IO
■ 3.3V core power supply (V
DD
)
■ 2.5V or 3.3V IO supply (V
DDQ
)
■ Fast clock-to-output times
❐ 6.5 ns (133 MHz version)
■ Provide high performance 2-1-1-1 access rate
■ User selectable burst counter supporting Intel Pentium inter-
leaved or linear burst sequences
■ Separate processor and controller address strobes
■ Synchronous self-timed write
■ Asynchronous output enable
■ Available in Pb-free 100-Pin TQFP package, Pb-free and
non-Pb-free 119-Ball BGA package
■ ZZ Sleep Mode option
Functional Description
The CY7C1345G is a 128K x 36 synchronous cache RAM
designed to interface with high speed microprocessors with
minimum glue logic. The maximum access delay from clock rise
is 6.5 ns (133 MHz version). A two-bit on-chip counter captures
the first address in a burst and increments the address automat-
ically for the rest of the burst access. All synchronous inputs are
gated by registers controlled by a positive edge triggered Clock
Input (CLK). The synchronous inputs include all addresses, all
data inputs, address pipelining Chip Enable (CE
1
), depth
expansion Chip Enables (CE
2
and
CE
3
), Burst Control inputs
(ADSC
, ADSP,
and
ADV), Write Enables
(
BW
x
,
and BWE
), and
Global Write (GW
). Asynchronous inputs include the Output
Enable (OE
) and the ZZ pin.
The CY7C1345G enables either interleaved or linear burst
sequences, selected by the MODE input pin. A HIGH selects an
interleaved burst sequence, while a LOW selects a linear burst
sequence. Burst accesses are initiated with the Processor
Address Strobe (ADSP
) or the cache Controller Address Strobe
(ADSC
) inputs.
Addresses and chip enables are registered at rising edge of
clock when either Address Strobe Processor (ADSP
) or Address
Strobe Controller (
ADSC
) is active. Subsequent burst addresses
are internally generated as controlled by the Advance pin (ADV
).
The CY7C1345G operates from a +3.3V core power supply
while all outputs operate with either a +2.5 or +3.3V supply. All
inputs and outputs are JEDEC standard JESD8-5 compatible.
For best practice recommendations, refer to the Cypress appli-
cation note AN1064, SRAM System Guidelines.
Selection Guide
Parameter 133 MHz 100 MHz Unit
Maximum Access Time 6.5 8.0 ns
Maximum Operating Current 225 205 mA
Maximum Standby Current 40 40 mA