Filter
Top Products
CY7C1370D
CY7C1372D
Document #: 38-05555 Rev. *F Page 9 of 28
Notes:
1. X = “Don't Care”, H = Logic HIGH, L = Logic LOW, CE
stands for ALL Chip Enables active. BWx = L signifies at least one Byte Write Select is active, BWx = Valid
signifies that the desired byte write selects are asserted, see Write Cycle Description table for details.
2. Write is defined by WE
and BW
X
. See Write Cycle Description table for details.
3. When a write cycle is detected, all I/Os are tri-stated, even during byte writes.
4. The DQ and DQP pins are controlled by the current cycle and the OE
signal.
5. CEN
= H inserts wait states.
6. Device will power-up deselected and the I/Os in a tri-state condition, regardless of OE
.
7. OE
is asynchronous and is not sampled with the clock rise. It is masked internally during write cycles.During a read cycle DQ
s
and DQP
X
= Three-state when OE
is inactive or when the device is deselected, and DQ
s
= data when OE is active.
Truth Table
[1, 2, 3, 4, 5, 6, 7]
Operation
Address
Used CE ZZ ADV/LD WE BW
x
OE CEN CLK DQ
Deselect Cycle None H L L X X X L L-H Tri-State
Continue Deselect Cycle None X L H X X X L L-H Tri-State
Read Cycle (Begin Burst) External L L L H X L L L-H Data Out (Q)
Read Cycle (Continue Burst) Next X L H X X L L L-H Data Out (Q)
NOP/Dummy Read (Begin Burst) External L L L H X H L L-H Tri-State
Dummy Read (Continue Burst) Next X L H X X H L L-H Tri-State
Write Cycle (Begin Burst) External L L L L L X L L-H Data In (D)
Write Cycle (Continue Burst) Next X L H X L X L L-H Data In (D)
NOP/Write Abort (Begin Burst) None L L L L H X L L-H Tri-State
Write Abort (Continue Burst) Next X L H X H X L L-H Tri-State
Ignore Clock Edge (Stall) Current X L X X X X H L-H –
Sleep Mode None X H X X X X X X Tri-State
[+] Feedback