Filter
Top Products
16 Windows 95 and 98 Printer Driver Installation and Technical Reference
15. If necessary, press the ENTER button until CR is displayed.
16. Press the OPTION button. The current Buffered Mode setting appears.
17. If necessary, press the ENTER button until Off is displayed.
18. Press the OPTION button. The current Data Conversion setting appears.
19. If necessary, press the ENTER button until ## is displayed.
20. Press the OPTION button. The current Protocol setting appears.
21. If necessary, press the ENTER button until CPX Special is displayed.
If you cycle through the choices and CPX Special is not one of them, the
operating system EPROM must be upgraded.
22. Press the READY button.
23. Power off the printer, and then power it on.