Datacard Group 553772-001 Printer User Manual


 
Page 7
Loading print ribbon
1
Open the printer.
2
Remove the ribbon cartridge with the used ribbon.
3
Remove both used ribbon spools from the cartridge.
Tips: Handling print ribbon
Keep unused ribbon in the original package.
Don’t place ribbon on a dusty or dirty surface–dirt
could damage the printhead.
4
Run a cleaning card and replace the cleaning sleeve
at the same time that you load a new print ribbon.
See “Cleaning the printer” on page 17 for the steps
to follow.
5
Load the new roll of print ribbon on the cartridge.
Put the full spool of ribbon on the supply spindle
of the ribbon cartridge. Push until the spool
clicks onto the spindle.
Put the empty take-up spool on the spindle with
the solid black gear. Push until the spool clicks
onto the spindle.