Filter
Top Products
Interface Related Features
Product Reference Guide 6-59
Interface Related Features
Interface Type
Specifies the current scanner interface. Selections are:
INTERFACE TYPE
INTERFACE IDENTIFICATION NUMBER
a
a. To access a scanner’s interface identification number, place the
scanner in Scanner Diagnostic Mode and view the 7-segment FRU
display (reference
Scanner Diagnostic Mode in Chapter 2 for
more information).
RS-232 Standard 05
RS-232 Wincor-Nixdorf 12
RS-232 Single Cable 20
IBM USB 45
IBM
Port 17
04
NOT USER-SELECTABLE
Null Interface
Indicated by 7-segment FRU display flashing
0 at start-up
NOTE
A new scanner may have been shipped from the factory with a Null Interface
(no interface type selected) to ensure system compatibility at installation. In
this case, the correct Interface Type programming bar code must be scanned
first before the scanner can be used with a POS system.
NOTE
If the scanner’s interface type must be changed, always be sure that interface
configuration is the FIRST item scanned during a programming session.
(Selecting an interface type resets ALL other configuration items to the fac-
tory default for that interface type.)