Filter
Top Products
DATALOGIC C-BOX 200
Installation - 3
2.2 OPENING THE DEVICE
To install the C-BOX 200 or during normal maintenance, it is necessary to
open it by unscrewing the four cover screws:
WARNING
The C-BOX 200 must be disconnected from the
power supply during this operation.
Figure 2.2 - Opening the C-BOX 200
It is possible to perform the following operations:
• Proceed with the cable connections (see paragraph 2.4.2).
• Set the multiplexer address selection on the rotary switches.
• Mount the C-BOX 200 to a wall or panel.