DS8100A-3002 QUICK GUIDE
4
Accessories:
NAME Description Part Number
PWO-480 Power and Connect System 480W 93ACC1767
FS-1 Frame Shaper (8 pcs) 93ACC1750
FBK-8100 Fast Bracket Kit (2 pcs) 93ACC1130
US-8100 Bracket Kit (10 pcs) 93ACC1140
GFC-80 90 Degree Mirror 93A251020
GFC-800 90 Degree Close Distance Mirror 93A201103
S30 Photocell Kit 93ACC1782
PH-1 Photocell Kit - PNP 93ACC1791
MEP-543 Photocell Kit - NPN 93ACC1728
OEK-2 Optical Encoder Kit (10 m cable + spring) 93ACC1770
OEK-1 Optical Encoder Kit + 10 m cable 93ACC1600
BTK-8100 Bus Terminator Kit (5 pcs) 93ACC1090
BTK-8500 IP65 Terminator Kit (2 pcs) 93A051286
PLL-8000 Optocoupled PLL device 93ACC1280
CAB-8100 10 wire shielded cable D 9.5 mm – 50 m 93ACC1120
CAB-8101 17-pin scanner/scanner connection cable 1.2 m 93A051020
CAB-8102 17-pin scanner/scanner connection cable 2.5 m 93A051030
CAB-8105 17-pin scanner/scanner connection cable 5 m 93A051040
CAB-8501 IP65 Cable Fam 8K 1,2 m 93A051283
CAB-8502 IP65 Cable Fam 8K 2,5 m 93A051284
CAB-8505 IP65 Cable Fam 8K 5 m 93A051285
Datalogic WebSentinel-005 Supervisor (up to 5 arrays) 93A101014
Datalogic WebSentinel-010 Supervisor (up to 10 arrays) 93A101015
Datalogic WebSentinel-020 Supervisor (up to 20 arrays) 93A101016
Datalogic WebSentinel-032 Supervisor (up to 32 arrays) 93A101017
Datalogic WebSentinel-064 Supervisor (up to 64 arrays) 93A101018
Datalogic WebSentinel-128 Supervisor (up to 128 arrays) 93A101019
Datalogic WebSentinel-256 Supervisor (up to 256 arrays) 93A101020
Electrical Connections:
Two 17-pin connectors provide access to the scanner’s local Lonworks network used for both input and output
connections to build a multi-sided or omni-station system.
17-pin Lonworks Connector Pinout
Pin Name
Function
A1 GND Supply voltage (negative pin)
A2 VS Supply voltage 20 to 30 Vdc (positive pin)
Cable shield A - internally connected by
1 CHASSIS
capacitor to chassis
2 n.c. Not connected
Cable shield B - internally connected by
3 CHASSIS
capacitor to chassis
4 TXAUX
Transmit data of auxiliary RS232
(referred to SGND)
5 SGND Signal ground (connected to GND)
6 RXAUX
Receive data of auxiliary RS232
(referred to SGND)
7 VS_I/O Supply voltage of I/O circuit
8 Lon A+ Lonworks a line (positive pin)
9 Lon A- Lonworks a line (negative pin)
10 Lon B+ Lonworks b line (positive pin)
11 Lon B- Lonworks b line (negative pin)
12 SYS_I/O System signal
13 SYS_ENC_I/O System signal
14 Reserved Internally connected
15 Ref_I/O Reference voltage of I/O circuit
A1
A2
1
15
Female - Output
A1
A2
1
15
Male - Input
17-pin Local Lonworks Connectors