10
ITC-100 Tally Input - Pin Cross Reference
If you are using the ITC-100KF1000 with a Datavideo SE-1000 via a TB-10 you do
not need to worry about tally information, as it is automatically sent to the ITC-100
KF1000. If you are using the ITC-100 with other equipment the following tables
explain the pin configurations of Tally A and Tally B.
Contact closure between the relevant Pin number and ground will illuminate the LED.
For example on Tally A, if Pin 1 is connected to Pin 4 the RED LED will light up on
Channel 1; if Pin 13 is connected to Pin 4 the AMBER LED will light up on Channel 3
Tally A Input
The Tally A Input will send Tally Information to Channels 1 ~ 4. The following table
shows the pin numbers for each channel:
Pins 4, 9 and 14 can be used as ground.
Tally B Input
The Tally B Input will send Tally Information to Channels 5 ~ 8. The following table
shows the pin numbers for each channel:
Pins 4, 9 and 14 can be used as ground.
Video
Channel
Red LED
LIVE
(On Air)
Amber LED
CUED
(Next)
1 Pin 1 Pin 3
2 Pin 6 Pin 8
3 Pin 11 Pin 13
AUX 1 Pin 5 Pin 15
Video
Channel
Red LED
LIVE
(On Air)
Amber LED
CUED
(Next)
4 Pin 1 Pin 3
5 Pin 6 Pin 8
6 Pin 11 Pin 13
AUX 2 Pin 5 Pin 15
