Filter
Top Products
6
Rear Panel:
Channel Input / Output XLR Sockets
Each of the 8 channels has an XLR connector that carries
bi-directional signals between the ITC-100 and ITC-100SL. All
connections are contained within the one cable. Channels 1 ~ 3
are supplied tally light information from tally A; channels 4 ~ 6
are supplied tally light information from tally B.
Tally Inputs A & B
Tally Inputs A & B are configured for direct connection to the
Datavideo SE-1000 via the TB-10. They supply tally information
to the ITC-100SL; RED indicates Live. Tally A will feed
information to channels 1 ~ 3 and Tally B will feed information to
channels 4 ~ 6
DC In 12V 2.5A
Connect the 12V 3.0A power supply. The power supply plug
has a screw in locking collar to secure the connection.
Ground Terminal
When connecting this unit to any other component, make sure
that it is properly grounded by connecting this terminal to an
appropriate point. When connecting, use the socket and be sure
to use wire with a cross-sectional area of at least 1.0 mm2.