Filter
Top Products
5
Introduction
Thank you for purchasing Datavideo’s RMC-120. The RMC-
120 is an SE-800 accessory, which can be used to remotely
control the SE-800 via RS-232 commands with a simple, but
unique operator control interface. You will be amazed and
pleased at what you can do with this advanced piece of
technology. In order to bring out the maximum performance
of this unit, we recommend that you spend some time reading
this manual carefully.
Product Overview
The RMC-120 is designed to control the SE-800 via Ethernet.
Now you can remotely control shots, mixes, and edits, all
within the SE-800 RS-232 protocol. The RMC-120 is a simple
RJ45 to RS-232 device, featuring powerful software that
allows you to use your PC or laptop as a control center.
What is the benefit of using an RMC-120? For example, you
could use it in remote areas, where you might be far away
from your switcher, as long as you have an Internet
connection you can always be in control.
The full size control panel includes most control functions of
the SE-800, which includes video selection, audio selection,
video effects, transition effects, color corrections and RGB
corrections. Also, it includes 30 user programmable macro
function keys that let you play back preset transitions and
effects instantly by clicking a single button.
22
Trouble shooting
1. “Connect failed” error message.
Please check your PC Computer IP address
settings again, and be sure it has been set up
properly.
IP address: 192.168.0.1
Subnet mask: 255.255.255.0
RMC-120 IP address settings assigned Condition
Setting the Local IP: 192.168.0.7
Setting the Subnet Mask : 255.255.255.0
Setting the Remote IP: 192.168.0.1
SE-800 PC Control Software IP address settings
assigned Condition
Client Mode setting Remote IP 192.168.0.7