Daxten DSR1020 Switch User Manual


 
Chapter 4: Remote Operations 47
Power Controlling Target Devices
NOTE: You must have Appliance Administrator privileges to change SPC power control device settings.
If a target device is connected to an SPC power control device outlet, you may power up, power
down or cycle (power target device down and then up) the target device using the DSR web server.
To power up a target device:
1. Select Appliance - Appliance Settings - Ports - SPC - Sockets from the DSR Explorer. The SPC
sockets window will appear.
2. Select the checkbox to the left of the device that you wish to power.
3. Click the On button.
To power down a target device:
1. Select Appliance - Appliance Settings - Ports - SPC - Sockets from the DSR Explorer. The SPC
sockets window will appear.
2. Select the checkbox to the left of the device that you wish to power down.
3. Click the Off button.
To power cycle a target device:
1. Select Appliance - Appliance Settings - Ports - SPC - Sockets from the DSR Explorer. The SPC
sockets window will appear.
2. Select the checkbox to the left of the device that you wish to cycle.
3. Click the Cycle button.
To change the minimum on time, off time or wake up state:
1. Select Appliance - Appliance Settings - Ports - SPC - Sockets from the DSR Explorer.
2. Click the socket name that you wish to modify.
3. Use the drop down windows to alter the desired settings.
4. Click the Save button to exit.
To view device details regarding the connected SPC device:
Select Appliance - Appliance Settings - Ports - SPC - Settings from the DSR Explorer.