Filter
Top Products
14 Setup and Quick Reference Guide
www.dell.com | support.dell.com
4
Connect the speakers.
5
Connect power cables to the computer, monitor, and devices and insert the other ends
of the power cables to electrical outlets.
6
Verify that the voltage selection switch is set correctly for your location. Your computer
has a manual voltage selection switch. Computers with a voltage selection switch on
the back panel must be manually set to operate at the correct operating voltage.
NOTICE: To help avoid damaging a computer with a manual voltage selection switch, set the
switch for the voltage that most closely matches the AC power available in your location.
7
Press the power buttons to turn on the computer and monitors.
See "Completed Setup" on page 17.
NOTE: Before you install any devices or software that did not ship with your computer, read the
documentation that came with the software or device, or contact the vendor to verify that the
software or device is compatible with your computer and operating system.
NOTE: Your system may very slightly from the following setup illustrations.
F1697ebk0.book Page 14 Monday, May 26, 2003 10:26 AM