Filter
Top Products
DIMMS can be hot. Allow sufficient time for the blade components to cool before starting this
procedure.
Card InstallationRev 1.0
Mellanox Technologies
20
1. Remove the blade from the chassis.
2. Remove the cover from the blade.
3. Open the retaining clip.
The card can be placed in either of the two available slots.
4. Expose the socket to be used for the new card.
a. When replacing an existing card, remove the card from the socket. Grab the card on the edge
on the side with UPC number and pull up while gently rocking the card back and forth.
b.
For a new installation remove the protective cover enclosing the socket for the card.
Figure 9: Protective Cover in Place