Filter
Top Products
ConnectX®-3 Dual Port 40Gb/s and 56Gb/s Mezzanine Card for Dell User Manual Rev 1.0
Mellanox Technologies
7
About this Manual
This User Manual describes ConnectX®-3 Dual QSFP Port mezzanine card for the Dell Blade
Servers. It provides details as to the interfaces of the board, specifications, required software and
firmware for operating the cards, installation instructions, and relevant documentation.
Intended Audience
This manual is intended for the installer and user of the mezzanine cards.
The manual assumes basic familiarity with the InfiniBand
®
(IB) network architecture specifica-
tions.
Related Documentation
Table 2 -
IBTA Specification Release 1.2.1 InfiniBand Architecture Specification
PCI Express 3.0 Specifications Industry Standard PCI Express 3.0 Base and Card Electromechanical
Specifications
Documents List
Online Resources
• Mellanox Technologies Web pages: http://www.mellanox.com
• Dell Support Web pages: http://support.dell.com
Document Conventions
When discussing memory sizes, MB and MBytes are used in this document to mean size in mega
bytes. The use of Mb or Mbits (small b) indicates size in mega bits.
These symbols indicate a situation, status, or condition that may cause harm
to people or damage to the equipment.