Filter
Top Products
2-12 Dell PowerVault Systems Storage Area Network (SAN) Installation and Troubleshooting Guide
DELL CONFIDENTIAL - Preliminary 3/16/00
(Rev. 11/3/98) FILE LOCATION:
S:\SYSTEMS\San\San2_0\I&T_Guide\English\91WYJ_A00\91WYJc20.fm
4. Reboot all servers.
5. Install the Data Managed Node for NetWare on one of the NetWare servers. For
instructions, see Chapter 12, “Novell NetWare Support for Dell PowerVault 6xxF
Storage Systems.”
6. Install the QLogic Fibre Channel Configuration Utility on the Windows NT man-
agement station. For instructions, see Chapter 4, “Installing the Host Bus
Adapter in the Server.”
7. Install the Dell OpenManage Data Supervisor or the Dell OpenManage Data
Administrator on the Windows NT management station. For instructions, see
Chapter 10 “Installing and Configuring Windows NT SAN Software
Components.“
8. Bind LUNs. For instructions, see the
Dell OpenManage Data Supervisor, Event
Monitor, and Integrator Installation and Operation
guide or the
Dell OpenManage
Data Administrator Installation and Operation Guide
.
9. Reboot all servers.
10. Use Mount commands to allocate LUNs to the NetWare servers. For instruc-
tions, see Chapter 12, “Novell NetWare Support for Dell PowerVault 6xxF Storage
Systems.”
11. Install system management software. For instructions, see Chapter 11, “Manag-
ing the SAN.”
12. Install the selected SAN tape backup software. For instructions, see the software
documentation.
'/0
Figure 2-3 shows a heterogeneous storage consolidation SAN with Windows NT stor-
age consolidation, Windows NT cluster, and NetWare 4.2 storage consolidation.