Filter
Top Products
Troubleshooting Your Projector 47
TEMP light is blinking amber A projector fan has failed and the projector
will automatically shut down. Try to clear the
projector protection mode by pressing and
holding the POWER button for 15 seconds.
Please wait for about 5 minutes and try to
power up again. If the problem persists,
contact Dell™.
The OSD does not appear on
the screen
Try to press the Menu button on the panel for
15 seconds to unlock the OSD. Check the
Menu Lock on page 38.
The remote control is not
operating smoothly or works
only within a limited range
The battery may be low. If so, replace with the
same or equivalent type recommended by the
battery manufacturer.
Problem
(continued)
Possible Solution
(continued)